Optical cable splice box with high quality and stable internal structure

Optical cable splice box, innovative clamshell design, the overall use of stainless steel screws to fix and seal, is currently the most reliable splice box at home and abroad. It is suitable for overhead, pipeline, direct buried and other laying methods of optical cables of various structures, straight-through and branch connections. Optical cable splice boxes are usually suitable for indoor or non-open outdoor use, and are not suitable for outdoor use. If necessary, protective measures should be taken.
What are the characteristics of the optical cable splice box? Let's take a look together:
1. It has the function of uninterrupted fiber core passing, which can be opened and used repeatedly.
2. The box body is made of imported high-strength engineering plastics, injected with anti-aging agent, and externally fastened, made of stainless steel.
3. The splicing tray adopts a superimposed structure, which is flexible in configuration and easy to install.
4. It can be used to connect with ordinary optical cables and ribbon optical cables, and the sealing measures are excellent.
The internal structure of the optical cable splice box is stable, and a few points are summarized as follows:
1. Support frame: it is the main body of the internal components.
2. Optical cable fixing device: used for fixing the optical cable and the base and fixing the optical cable strengthening element.
3. Optical fiber placement device: It can store optical fiber connectors and remaining optical fibers in an orderly manner. The length of the remaining optical fibers should not be less than 1 meter, and the winding diameter of the remaining optical fiber reels should not be less than 35mm.
4. Optical fiber connector protection: Put the heat-shrinkable protective sleeve on the fiber core fixing clip in the storage tray, or use silica gel fixing method.
5. Sealing of optical cable and splice box: Use gauze to polish the joint between the splice box and the optical cable at the entrance of the optical cable and the base. Clean the polished part with detergent, paste aluminum foil on it, then place the heat-shrinkable tube at the cable inlet of the joint box, and heat it slowly with a blowtorch in the way of first the middle and then both ends, so that the entire heat-shrinkable tube can be completely shrunk.