Call Us: +86-574-62597618Email: linda@lptel.net
enLanguage

How To Use The Fiber Optic Terminal Box?

May 06, 2023

1. The fiber optic terminal box first has a fixing function. After the fiber optic cable is strung into the living room, the fiber optic terminal box can mechanically fix the fiber optic cable, install ground wire protection components, perform terminal protection processing, and group and protect the optical fibers.
2. After the optical cable is fixed, the optical fiber drawn from the optical cable is fused with the tail cable through the optical fiber terminal box, and then the excess optical fiber is coiled and stored, and the fusion joint is protected.
3. In the networking configuration of electrical products, first insert the connector attached to the pigtail cable in the optical fiber terminal box to the adapter, and then realize optical connection with the optical connector on the other side of the adapter.
4. There are many ways to form an optical cable at the user end. Two inputs and eight outputs are very representative. Let me explain it to you in detail. That is, after an optical cable arrives at the user end, it is fixed in the optical fiber terminal box, and the fiber core and pigtail in the optical cable are fused in the terminal box. For example, there is an 8-core optical cable (there are 8 cores in the optical cable), Then it can splice up to 8 pigtails through the terminal box. That is to say, two optical cables enter a terminal box, and a total of 8 pigtails are melted out as required. It can be used for networking of different electronic terminal equipment.
5. Then connect with the computer. Connect the network cable from the fiber optic terminal box to the WAN port of the router, and then to the switch. The computer network cable is also connected to the switch.
6. The connector is used for computer settings. Just set the gateway of the router in TCPIP of a computer, then log in to the router, add static IP, subnet mask, DNS, etc. to the user name and password, and finally save and restart the router. The fiber optic terminal box is connected to the computer.