Preconnect Terminal Closure
Model No.: LPTC-07
LPTC-07A has 2 optical cable inlets and outlets and is suitable for wall-mounting, pole-mounting, and other installation methods.
Description
|
Model No. |
Classification |
|
LPTC-07 |
Preconnect Terminal Closure (waterproof connector) |
LPTC-07 terminal closure is a cable preconnect device that can be used for splicing and branching optical cables. It has 2 optical cable inlets and outlets and is suitable for wall-mounting, pole-mounting, and other installation methods. Our company's products are designed to be unaffected by external environmental factors. This product has a wide range of applications, good sealing performance, and convenient installation. The outer shell is made of high-strength engineering plastic, which is resistant to aging, corrosion, and high/low temperatures, and has high mechanical strength. We have been tirelessly dedicated to the research and development of communication connection equipment, and our optical cable joint box is a reliable choice to ensure the quality of your information transmission.
Specifications
|
Item |
Specifications |
|
External dimension (mm) |
235 x 185 x 95 mm |
|
Material of housing |
MPP |
|
UV radiation (Hour) |
720 (ASTM G155) |
|
Sealing type |
Mechanical |
|
Number of ports |
2 entrance ports 8 drop cable ports |
|
Max. cable diameter of loop cable (mm) |
Φ12 |
|
Max. splice capacity (single fiber) |
12 |
|
Adaptor loading |
8 pcs waterproof SC simplex adaptor |
|
PLC splitter |
1x2, 1x4, 1x8, 1x16 PLC splitter |
|
IP grade |
65 |
|
Radius of curvature |
> 30mm |
|
Working temperature (℃) |
-40 to +65℃ |
|
Insulation resistance |
≥2X104MΩ |
Standards Comply
|
ITU-T L.201 |
Performance requirements for passive optical nodes: Sealed Closures for Outdoor Environments |
|
Telcordia GR-771-CORE |
Generic requirements for fiber optic splice closures |
|
UL 94 |
Standard for tests for flammability of plastic materials for parts in devices and appliances. |
|
IEC-60529 |
Degrees of protection provided by enclosures (IP Code) |
Applications Environment
|
Item |
Value |
|
Operation temperature |
-40 ºC～+65 ºC |
|
Installation temperature |
-10 ºC～+50 ºC |
|
Storage temperature |
-45 ºC～+65 ºC |
|
Relative humidity |
5%～95% |
Installation Process
I. Preparation
- Before installation, check the model, number of optical fibers, and accessories of the fiber optic splice closure.
- Before installation, keep all accessories dry and clean.
- Maintain a clean (dry and dust-free) and flat working environment.
- The installation process must use standard equipment and tools.
II. Fiber Cable Handling
- Strip the outer sheath of the fiber cable to a length of 1.2 meters; do not cut the fiber cable at 0.5 meters or 1.5 meters (see Figure 3).
- Cut the fiber cable's strength member to a length of 5 centimeters.
Notes: ① The fiber optic is not damaged. ② If the fiber optic is damaged, the damaged portion must be cut off, and a new fiber optic should be stripped.
III. Installation Process Instructions
- Prepare a cut fiber cable.
- Use a crosshead screwdriver to loosen the fixing screws of the closure.
- Open the product and use a screwdriver to loosen the fixing screws of the fiber cable clamp.
- Place the cut fiber cable into the box, secure the strength member and fiber cable clamp, fasten the remaining fiber optic using zip ties and neatly coil it inside the box. Introduce the fiber optic into the fusion splicer holder and wait for fusion splicing with the splitter input end.
- Fuse the fiber optic with the splitter input end, and insert the output end of the splitter into the connector.
- After fusion splicing is completed, align the pigtail fiber with the connector, use a quick connector, and insert the assembly into the connector housing.
IV. Box Sealing
- The installation of the fiber optic storage tray should be neat, and the fiber routing bend radius should meet the requirements.
- Internal fasteners should be tightened.
- The amount of sealing tape should be reasonable.
- The sealing strip should be placed flatly in the corresponding slot of the splice closure.
Hot Tags: preconnect terminal closure, China preconnect terminal closure manufacturers, suppliers, factory, Fiber Aerial Terminal Closure, Aerial Terminal Closure, Terminal Closure, Optical Terminal Closure
Send Inquiry
